See dimension below with a picture showing the plug size.ĭo I need any software for burning CD/DVD/Blu-ray with my optical drive in this enclosure? Another important thing is the plug size. Any bigger ac adapter for this enclosure MUST be 12VDC, but the current (Amp) can be from 3A to 5A is fine. You just need to get a bigger ac adapter. I have an optical drive that requires more power than what a normal optical drive uses, what can I do to make it work? It will not work with an IDE optical drive. It will work with any standard SATA optical drive. This enclosure is using a SATA interface inside to connect to a SATA optical drive. Once installed and powered ON, the system will see the USB optical drive instantly. No, drivers are not required, it is plug_and_play. The power requirement of your optical drive is also important, if your optical drive (power requirement info on your optical drive label) power requirement exceeds the capability of our provided ac adapter, your optical drive may not function correctly. This enclosure is designed to fit a 5.25” standard optical drive with a depth of 185mm.
Yes, as long as the measurement fit and the optical do not consume too much power. Will the NST-540S3-BK / NST-536S3-BK works with any 5.25” Optical Drive? If you just install an Optical Drive into the DX enclosure and try powering ON without connecting to a working computer, it will stay in sleep mode and not wake up. The right way to use this enclosure is to make sure all the necessary cables are connected AND your system is powered ON before turning ON the enclosure.
This is one of the most common questions, this enclosure is designed to save energy, when it detects no connection to a working system, it will go into a sleep mode and not power ON. Why is my Optical Drive Enclosure not powering up?
0 kommentar(er)
